- Enter your model number to make sure this fits.
- Gold medal winner by amazingribs.com: https://goo.gl/pQftD5
- PID controller designed for charcoal smoker. Fits 18.5″ Weber Smokey Mountain and Chargriller Akorn
- Regulates the on/off time of the blower to stabilizes the temperature. Have artificial intelligence feature to enhance the temperature control.
- A snap-on blower that can be installed easily installed
- A built-in buzzer that can be activated by either the high limit or the low limit alarm.
This PID controller is for controlling the temperature of charcoal smokers. It will regulate the on/off time interval of the blower to stabilize the temperature in the charcoal smoker.
Blower size should be selected according to the smoker size and cooking temperature. A lower air flow rate produces better control results in small smokers or cooking at lower temperature (< 250 F). A higher air flow rate works better for larger smokers, or for cooking at higher temperature. In general, the 6.5 CFM blower is recommended for Chargriller Akorn and 18.5″ Weber Somokey Mountain; the 10 CFM blower is recommended for 22.5″ Weber Smokey Mountain.
This kit includes:
1. Controller with artificial intelligent enhanced PID control program. It has a bright LED for outdoor use. It has a built-in buzzer that can be set for both low limit and high limit alarm. Developed by industrial control engineers, this controller utilizes an advanced AI (artificial intelligence) enhanced PID algorithm that can hold the cooking temperature within a tight range and prevent temperature overshooting from disturbances such as opening/closing the pit lid, wind, sun, and ambient temperature drops.
2. AC to 12VDC adapter with 1A maximum output. Note: we only carry adapters for two major plugs used worldwide: NEMA1-15 and CEE7/16. For the US and most international orders, we will ship the adapter for NEMA1-15 by default. For European continental countries, we will ship the adapter for CEE7/16.
3. K type thermocouple with alligator clip that can be easily attached to the rack.
4. A 5 mm thick silicone foam high temperature gasket is included. It is not needed for Chargriller Akorn.
5. A 6.5 CFM snap-on blower.
6. 6″ of High temperature aluminum foil tape for blocking unused venting holes.
For more options, please check here http://goo.gl/8S5k6H